Publicidad
Idiomas disponibles
Idiomas disponibles
9. Remove the LH Wheel Liner. - Remove the rear wheelhouse liner retainer (1) and fasteners (2), from the rear wheelhouse liner
(3).
Remove the rear wheelhouse liner fasteners (1, 2) and remove the rear wheelhouse liner (3) from the vehicle.
10. Reposition the Fuel filler Hose.
Remove the Fuel Filler Pipe Housing. - Fuel Tank Filler Pipe Housing Screws (Qty: 3). Disconnect the electrical connector
from the fuel tank filler door lock actuator. The fuel tank filler pipe housing will be removed by guiding the housing and actuator
out through the opening in the body panel.
Warning: Remove the fuel tank cap and relieve the fuel system pressure before servicing the fuel system in order to reduce the
risk of personal injury. After you relieve the fuel system pressure, a small amount of fuel may be released when servicing the fuel
lines, the fuel injection pump, or the connections. In order to reduce the risk of personal injury, cover the fuel system components
with a shop towel before disconnection. This will catch any fuel that may leak out. Place the towel in an approved container when
the disconnection is complete.
Corvetter Carbon Fiber Quarter Vents
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
84347360
IR 11SE17
PART NO.
DATE
11SE17
Initial Release - Scott Pouls
4
SHEET
REVISION
24
OF
AUTH
2641661
Publicidad
