Publicidad
Idiomas disponibles
Idiomas disponibles
11. Remove the left side Quarter panels. - remove the Quarter Panel Bolts (Qty: 5) labeled #1, and Quarter Panel Upper Bolts
(Qty: 4) labeled #2 in the picture below. Make sure to be careful with the panel as the paint on it can be scratched easily. Please
the part on a soft clean surface to prevent scratches and or damage. Note: There is adhesive strips below the quarter window
and along the top of the quarter outer panel.
12. Remove the Quarter panel vent. - Quarter Panel Air vent Nut (Qty: 3)
13. Install New Quarter Panel Vent. - Quarter Panel Air Scoop Nut (Qty: 3) tighten to 2 Nm (18 lb in)
14. Reattach the Quarter panel to car. - Quarter Panel Bolts (Qty: 5) (1) to 3 Nm (27 lb in), and the Quarter Panel Upper Bolts
(Qty: 4) (2) tighten to 3 Nm (27 lb in)
15. Remove the right hand Quarter panels. - remove the Quarter Panel Bolts (Qty: 5) labeled #1, and Quarter Panel Upper Bolts
(Qty: 4) labeled #2 in the picture below. Make sure to be careful with the panel as the paint on it can be scratched easily. Please
the part on a soft clean surface to prevent scratches and or damage. Note: There is adhesive strips below the quarter window
and along the top of the quarter outer panel.
Corvetter Carbon Fiber Quarter Vents
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
84347360
IR 11SE17
PART NO.
DATE
11SE17
Initial Release - Scott Pouls
5
SHEET
REVISION
24
OF
AUTH
2641661
Publicidad
