Publicidad
Idiomas disponibles
Idiomas disponibles
16. Remove the Quarter panel vent. - Quarter Panel Air vent Nut (Qty: 3)
17. Install New Quarter Panel Vent. - Quarter Panel Air Scoop Nut (Qty: 3) tighten to 2 Nm (18 lb in)
18. Reattach the Quarter panel to car. - Quarter Panel Bolts (Qty: 5) (1) to 3 Nm (27 lb in), and the Quarter Panel Upper Bolts
(Qty: 4) (2) tighten to 3 Nm (27 lb in)
19. Reposition the Fuel Fill neck and attach to quarter panel. - Fuel Tank Filler Pipe Housing Screws (Qty: 3) (1) tighten to
2.5 Nm (22 lb in)
20. Reattach the fuel Tank filler door. - line up the inner door with the arm and slide on the arm till it snaps in place.
Corvetter Carbon Fiber Quarter Vents
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
84347360
IR 11SE17
PART NO.
DATE
11SE17
Initial Release - Scott Pouls
6
SHEET
REVISION
24
OF
AUTH
2641661
Publicidad
