Tabla de contenido
Publicidad
Sicherheitshinweise
Safety information
Indicaciones de seguridad
Consignes de sécurité
1 or 2 LED displays light up. While
it's in storage, check the charge
level regularly and recharge it to
25% at least if necessary.
In order to ensure top perfor-
mance, always have a charged
battery at the ready.
Storage conditions
The batteries must be kept in a
suitable storage room to prevent
them from being subjected to
direct sunlight and high tempera-
tures. A lithium battery can't be
stored away for a long period of
time without recharging it.
If batteries aren't checked fre-
quently and recharged, they can
become faulty.
As the BA001 battery contains
electronic parts, self-consumption
can be higher than the discharge of
the cells. Therefore, the product
must be considered a device with
batteries and treated accordingly.
The self-consumption of some
batteries varies. This doesn't
hamper normal usage in any way,
but when storing batteries, the
worst-case scenario must be
assumed.
Therefore: don't store the batteries
after receiving them because
these are only charged to a maxi-
mum of 30% when sent by air
freight. A BA001 with 30% battery
capacity must be charged immedi-
ately after delivery.
When storing the BA001, the
following conditions must be met:
• First-in–first-out principle
• Use the charging methods and
devices.
14
And under the following recom-
mended conditions:
Temperature:
Relative humidity:
Air pressure:
Altitude:
Discharging the battery during
storage: discharge the battery by
6 months after the production date
stated on the label at the latest.
A BA001 with under 25% capacity
may not be stowed away.
Impact of the temperature during
storage on the storage period
– fully charged:
0° up to +25°C 6 months
0° up to +50°C 3 months
0° up to +60°C less than 1 month
If it's not charged and the battery's
capacity drops to under 5%, the
battery will switch off to protect
itself: at a charge capacity of
below 5%, an alarm sounds when
the batteries are activated. No LED
light bars will be activated.
Repairs
In order to avoid malfunctions, any
repairs on the Timetable Lift may
only be carried out by authorised
Wilkhahn workshops or service
personnel because special tools
need to be used and sealing fitted.
Drive systems still covered by
guarantee must be sent to Wilk-
hahn workshops.
Caution!
If Timetable Lift components are
opened they might malfunction.
0°C to +45°C
45 – 85% RH
700 – 1,060 hPa
< 2,000 m
Publicidad
Tabla de contenido
