INSTALLATION
9.3.4
Making holes for the pipes
• Case A: Pipework exiting from the rear of the unit.
In this case, a suitable hole must be made in the wall behind
the unit (see Figure 9.6).
- Drill a hole in accordance with the diameter and position
as indicated in Figures 9.6, ensure the hole is slightly
descending to the outside to allow for a fall in the drain line.
The dimensions are given in mm.
Fig. 9.6
Mounting plate for 17-025 NMWI.
EN
Fig. 9.7
Mounting plate for 17-035 NMWI.
- 12 -
15
SDH17-MNW-I_EN - 11/14 - Saunier Duval