Iso Din Radio Provision With Pocket - Metra 99-7519B Instrucciones De Instalación

ISO DIN radio provision with pocket

1. Slide the Pocket into the bottom
section of the Radio Housing.
(Figure A)
2. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
3. Mount the ISO Brackets to the
radio using the screws supplied
with the radio. (Figure B)
4. Slide the completed assembly into
the Radio Housing until it clicks in.
(Figure C)
5. Snap the ISO Trim Plate onto the
front of the Radio Housing. (Figure C)
6. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Test the
unit for proper operation.
7. Reassemble the dash in reverse
order of disassembly.
Kit Assembly
(Figure A)
99-7519B
(Figure B)
6
(Figure C)