Not SO5015_NC00015977_NC00015977 28/05/10 14:46 Page15
OPERATION
Each time before use, check that the appliance is in good condition.
Especially check that:
- the position of the appliance described in these instructions is respected.
- the air inlet and outlet grids are in no way obstructed.
- the appliance is placed on a horizontal, stable surface.
Function selection:
Select the desired function by turning switch B to line up the symbol on the switch with one of the
following symbols:
: on
: cooling
: Silence 1200W
: 2400W
Indicator:
On/off indicator: lights up when the unit is turned on.
Thermostat:
- Temperature setting: The temperature may be adjusted to your comfort.
- Frost-free setting
in a normally insulated room, whose volume corresponds to the power of your appliance.
Cool fan setting:
This setting enables you to use your fan heater as a cooling fan in summer.
Silence setting:
"Silence" setting, 1200W regulated by the thermostat.
2400W setting:
Maximum power setting 2400W, regulated by the thermostat.
TAKING CARE OF YOUR APPLIANCE
• The appliance must be unplugged and left to cool down before carrying out any work on it.
• Do not clean it with abrasive or corrosive products.
• Clean with a damp cloth.
• Clean the air inlet and outlet grids at least once a year (with a vacuum cleaner if necessary).
STORAGE
• It is extremely important that the unit be allowed to cool down before it is put away.
• The power cord can be rewound for storage.
• When you are not using your appliance, store it in a dry place.
: this setting enables you to automatically maintain the temperature above 0°C
15
GB