Masterbuilt MB20090819 Manual Del Usuario página 6

Assembly
5
Place silicone gasket onto back of element. Slide element through element bracket on heat shield, then align threaded
studs on element bracket with holes in back wall of smoker. On the back of the smoker, connect the yellow/green
ground wire to the top right threaded stud as shown below, then secure element with hex nuts. Place the element
gasket back into the opening.
B
X4
3
D
X1
E
X1
Element
Gasket
6
Yellow/Green
Ground Wire
Place star washer (E) over
E
the threaded stud first,
then the ground wire, lock
D
washer (D) and hex nut (B).
B
4