Southwire Triggers TSS-01 Instrucciones De Operación página 16

Operation cont.
INCREASING DISTANCE BY USING HANDHELD UNIT AS SIGNAL REPEATER
In normal operation all switches (Remote Unit and Handheld Units are
programmed to communicate individually direct to the Master Unit)
(Fig 1) (Fig 1)
Handheld
Master Unit
Handheld
Fig 1
Remote Unit
1.Turn on Master Unit by pressing the power button (1). Power light (4)
will indicate power to the unit.
2. Turn on the Remote Unit by pressing the Power button (1). Power
light will indicate power to the unit.
3. Turn on the Handheld Units by pressing the Power button (1). Power
light will indicate power to the unit.
4. The Master Unit will scan for Remote Unit and Handheld Units. As
they are found, an LED on the Amperage Draw Indicator will light up for
each devise found and the Signal Strength Indicator on the
corresponding Remote or Handheld Units will display signal strength.
This process can take several seconds.
5. Once all units are accounted for, Press the pedal on the Master Unit
and all units "LINKED" light will come on.
6. Walk the Remote Unit and a Handheld Unit to the feed end of the
pull.
15