Southwire Triggers TSS-01 Instrucciones De Operación página 17

Operation cont.
7. If Remote Unit Signal Strength Indicator shows weak or cycling
signal in top right corner, increase the distance from the Master Unit
until the Remote Unit Signal Strength Indicator is cycling. Leave the
Remote Unit there. Walk the Handheld Unit back towards the Master
Unit until the signal is acquired on the Signal Strength Indicator of the
Handheld Unit. The Remote Unit should then connect through the
Handheld Unit and increase the signal on the Signal Strength Indicator
of the Remote Unit (Fig 2).
Master Unit Handheld Remote Unit
(Fig 2)
8. If additional distance or signal strength is needed after connecting
through the first Handheld Unit, take the Remote Unit and second
Handheld Unit and increase the distance from the first Handheld Unit
until the Remote Unit Signal Indicator is cycling. Leave the Remote Unit
there. Walk the second Handheld Unit back towards the first Handheld
Unit until the signal is acquired on the Signal Strength Indicator on the
second Handheld Unit. The Remote Unit should then connect through
the second Handheld Unit then through the first Handheld Unit and
increase the signal on the Signal Strength Indicator on the Remote Unit
(Fig 3).
Handheld Handheld Remote Unit
Master Unit
(Fig 3)
16