Southwire Triggers TSS-01 Instrucciones De Operación página 9

Remote Unit Identification cont.
VISUAL COMMUNICATION
• POWER LIGHT (RED): Indicates unit is powered on
• VAC LOW (AMBER): Indicates A/C line voltage has dropped below
recommended optimal range
• LINKED LIGHT (BLUE): Indicates that unit is linked to the system
• MASTER UNIT STAND ALONE LIGHT (BLUE): Indicates that the master unit
is in stand alone mode
• STOP LIGHT (RED): Indicates that pull is at complete stop
• READY LIGHT (AMBER): Indicates that one pedal is depressed and there is no
forced stop condition present
• FLASHING READY: Only one button under foot pedal is depressed
• RUNNING LIGHT (GREEN): Indicates that both pedals are depressed and the
pull is in progress
• BATTERY METER: Shows approximate level of charge during use and charging
• RAPID FULL FLASHING BATTERY METER: Shows battery or charging fault
• SINGLE FLASHING BAR: Shows approximate battery level while charging
8