Southwire Triggers TSS-01 Instrucciones De Operación página 7

Master Unit Identification cont.
VISUAL COMMUNICATION
• POWER LIGHT (RED): Indicates unit is powered on
• VAC LOW (AMBER): Indicates A/C line voltage has dropped below
recommended optimal range
• LINKED LIGHT (BLUE): Indicates that unit is linked to the system
• REMOTE UNIT STAND ALONE LIGHT (BLUE): Indicates that the remote unit
is in stand alone mode
• STOP LIGHT (RED): Indicates that pull is at complete stop
• READY LIGHT (AMBER): Indicates that one pedal is depressed and there is no
forced stop condition present
• FLASHING READY: Only one button under foot pedal is depressed
• RUNNING LIGHT (GREEN): Indicates that both pedals are depressed and the
pull is in progress
• AMPERAGE DRAW INDICATOR: Shows approximate amperage draw for the
puller motor. USE LOW GEAR WHEN AMPERAGE DRAW INDICATOR REACHES
MAX IF PULLER IS NOT ALREADY IN LOW GEAR.
6