Charge The Battery - Fox Live Valve Guía De Referencia

CHARGE THE BATTERY

The battery can be charged on or off the bike. To display the battery
charge level, press the Power button. Battery level is indicated by 1-5
LED lights (when 5 LED lights illuminate, the battery is fully charged).
1. Remove the cover over the charging port of the battery.
2. Insert the provided micro USB cable into the USB port of the
battery. Then connect the USB cable to any USB charging port.
3. The green charging LED will illuminate. The green charging LED
will turn off when battery charging is complete (approximately 2
hours).
4. Reinstall the cover over the charging port of the battery.
SELECT YOUR SETTING
LIVE Valve has five programmed settings that can be selected to
control how sensitive the system feels. For example, setting five will
take a slightly bigger bump or landing to open compared to setting
four. We recommend you start in setting two.
1. If the system is not already on, press the Power button once.
2. Press and release the Settings Selector button once to determine
the existing setting.
3. Quickly press the Settings Selector button again to toggle through
the five settings.
4. When the LED lights turn off, this indicates the new setting has
been selected.
SETTING 2
5