Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1.1 WARNING plate
The following numbered text reflects the numbered
boxes on the plate.
B
Wire feed rollers can injure the hands
C
The welding wire and wire feeder unit are live
during welding. Keep hands and metal objects
well away.
1
Electric shocks caused by the welding
electrode or cable can be fatal. Protect
yourself properly against the risk of electric
shocks.
1.1 Wear insulated gloves. Never touch the
electrode with bare hands. Never wear damp
or damaged gloves.
1.2 Ensure you are insulated from the workpiece
and the ground.
1.3 Disconnect the supply cable plug before
working on the machine.
2
Inhaling fumes produced by welding can be
harmful to the health.
2.1 Keep your head away from the fumes.
2.2 Use a forced ventilation system or local
exhaust to remove fumes.
2.3 Use a suction fan to remove fumes.
3
Sparks generated by welding can cause
explosions or fires.
3.1 Keep flammable materials well away from the
welding area.
3.2 Sparks caused by welding can cause fires.
Keep an extinguisher nearby and ensure that
someone is ready to use it.
3.3 Never weld with closed containers.
4
Arc rays may injure the eyes and burn the
skin.
4.1 Wear a safety helmet and goggles. Use
appropriate ear protectors and overalls with
the collar buttoned up. Use helmet masks with
filters of the correct grade. Wear a full-body
protection.
5
Read the instructions before using the
machine or carrying out any operation on it.
6
Do not remove or cover warning labels.
3301059/A
1.2
Specifications
This device is a wire feeder for the execution of
the cold wire Tig process. This device can be
used in conjunction with the Win Tig 394.80,
395.80, 396.80, 381.80 power sources
automation range .
For the use of the wire feeder Art. 1649, it is
necessary to install the power supply kit Art. 435
inside the power sources over mentioned.
1.3 Explanation of technical specifications.
This machine is manufactured according to the
following standards: IEC 60974-1, IEC 60974-5,
IEC 60974-10 (CL. A).
N°.
Serial number, to be indicated on any
request regarding the wire feeder.
U1 Rated supply voltage
I1
Current uptake at maximum load
IP21S Degree of housing protection
Shaft nominal speed
Maximum torque
Regulator ratio
Encoder resolution
EN
200 rpm ±10%
5 Nm
24 / 1
100 imp/crankshaft
revs
15
Publicidad
Tabla de contenido
