Gears provided
1.4 Welding system composition
EN
The Cebora Cold Wire TIG Welding System is
designed for welding with a TIG PLASMA arc,
developed for use in combination with a welding
robot arm on automated welding systems. In the
full configuration, the
1
Cable connecting power source – control
panel (Item 2065 optional)
2
Cable connecting plasma console – wire
feeder (Item 2062 optional).
3
Cable connecting power source – CAN2 robot
control cabinet (Item 2063 optional)
4
Power source CANopen cable – Robot
interface or robot control (Item 2054 optional)
5
Robot control cabinet
6
Welding wire spool holder (Item 121)
7
TIG-plasma Torch
8
Wire feeder (Item 1649)
10 Welding wire sheath (Item 1935 optional)
21 WinTig series generator (394.80, 395.80,
396.80, 381.80)
22 Cooling unit
24 Power source control panel
25 Robot interface (Item 428.XX or Item 448
optional)
26 Standard cable corresponding to fieldbus used
30 Plasma console Item 465.01 (optional)
3301059/A
n° 2 37 mm Ø with
V groove for 1.0 Ø
and 1.2 mm wire.
n° 2
37 mm Ø,
with V groove for
0.8 and 1.6 mm Ø
wire
fig. 2
Feedable wire diameter
Wire speed range
Protection rating
Trolley sizes
Trolley weight.
system is made up of a power source, control panel
(opt.), internal or external cooling unit, a wire
feeder, a plasma console (opt.) and a robot
interface (opt.)(fig. 2).
33 Plasma console – power source – cooling unit
extension (Item 2067)
34 Plasma gas supply hose
35 Plasma gas cylinder
36 Gas shield supply hose (In PW configuration)
37 Gas shield cylinder
NOTE: If the robot control (Robot Control in Fig.
2)
is
fitted
with
communication line, interface (25) and cable (26)
are unnecessary. Use Item 2063 in combination
with Item 2054 in this configuration.
1.5
This instruction manual
This instruction manual refers to cold wire feeder
Item 1649 and has been prepared to instruct staff in
charge of installing, operating and maintaining the
welding machine.
It must be stored carefully in a place known to the
various people involved, and consulted whenever
[0,8 ÷ 1,6] mm.
[0,5 ÷ 10] m/min
IP 21 S
(W x L x H)
280x210x200 mm
5.5 kg
a
CANopen
DS401
16