Display Symbols - Seitron TCD01B Manual Del Usuario

DISPLAY SYMBOLS

In the following is explained the meaning of some symbols which may
appear on the display:
Battery status indication.
Flashing:
Batteries discharged; replace batteries.
Temperature regulation in Comfort mode.
Temperature regulation in Economy mode.
Programmable thermostat off: antifreeze function active,
the display shows 'OFF'.
Heating mode enabled.
Cooling mode enabled.
24h
Temperature regulation in Comfort mode for 24 hours.
The programmable thermostat is in programming mode.
If the parameter ' rEG ' is set on 'Int
" " Flashing:
Both temperature shown and room temperature regulation refer
to the internal sensor.
" " Fixed (if the remote sensor is not connected):
The temperature shown on the display is the one measured by
the remote sensor, yet the temperature regulation takes place
according to the internal sensor.
If the parameter ' rEG ' is set on 'EHt
" " Flashing:
Both temperature shown and room temperature regulation refer to
the remote sensor.
" " Fixed:
The temperature shown on the display is the one measured by
the internal sensor, yet the temperature regulation takes place
according to the remote sensor.
" " Flashing and " " Fixed (if the remote sensor is
faulty or not connected):
The temperature shown on the display is the one measured
by the remote sensor, yet the temperature regulation takes
place according to the internal sensor.
16
'.
'.