Master Forge 0050772 Manual De Instrucciones página 11

CONVERSION INSTRUCTIONS
3. Insert the provided orifice removal tool (B)
into burner openings and unscrew orifices
(1.06) from ends of valves. (Fig. 23)
4. Put the new orifice into the orifice removal
tool (B), and then insert the tool into the
burner opening and tighten the new orifice
to the valve. Repeat this step for all five
burners.
Make sure you are using the correct
orifice, which is marked "1.44". (Fig. 24)
5. Adjust main burners' air shutters by
loosening the air shutter screws.
The settings are: 1/4 in. open for LP gas;
1/16 in. - 1/8 in. open for NG gas.
(Fig. 25)
6. Insert main burners into firebox and secure
each main burner to bracket with R-pins.
(Fig. 26)
23
1.06
24
1.44
25
26
Lowes.com/masterforge
11
B
orifice
B
B
air shutter
main burner