Conversion Instructions For Item #0404349 - Master Forge 0050772 Manual De Instrucciones

CONVERSION INSTRUCTIONS

Conversion Instructions for Item #0404349

1. Main Burner Conversion
a. Open lid and remove the warming rack,
grids and flame steps. Then pull off the
R-pins and take the main burners out.
Adjust main burners' air shutters by
loosening the air shutter screws.
The settings are:
1/4 in. open for LP gas.
1/16 in. - 1/8 in. open for NG gas.
You need to adjust the openings before you
put the burners back in the burner box.
(Fig. 70)
b. Change to NG nozzle
Remove the LP nozzles first with the nozzle
removal tool (B). Install the NG nozzle
sized 1.37. (Fig. 71)
c. Adjust the main burner air shutter to have
a 1/16 in. -1/8 in. opening. Install the main
burner back to the fire box and secure to
the bracket with the R pins. (Fig. 72)
Make sure the nozzles are aligned with the
burners and the ignition pins are installed
in their original positions. Check the sparks
before operating your grill.
70
R-pin
71
72
Lowes.com/masterforge
26
bracket
main burner
1.37
B
air shutter