Master Forge 0050772 Manual De Instrucciones página 20

CONVERSION INSTRUCTIONS
4. Adjust the main burner air shutter to have
a 1/16 in. -1/8 in. opening. Install the main
burner back to the firebox and secure to
the bracket with the R-pins.
Make sure the orifices are aligned with the
burners and the ignition pins are installed
in their original positions. Check the sparks
before operating the grill. (Fig. 51)
5. Adjust the side burner air shutter so that
it is halfway open and re-install the side
burner. (Fig. 52)
6. Take the knobs off valve stems and adjust
the screws as shown in Fig. 53 using
the flathead screwdriver. Turn the screw
clockwise until it stops.
Make sure to completely tighten the
screws. Failure to tighten the screws will
result in the low heat setting working
improperly.
51
52
Air Shutter
Adjustment
53
Lowes.com/masterforge
20
air shutter
21