Conversion Instructions For Item #0314076 - Master Forge 0050772 Manual De Instrucciones

CONVERSION INSTRUCTIONS

Conversion Instructions for Item #0314076

1. Take the burners out and adjust the air
shutter.
a. Main burner conversion
Pull off the R-pins and take the main
burners out. Adjust main burners' air
shutters by loosening the air shutter
screws.
The settings are:
1/4 in. open for LP gas.
1/16 in. - 1/8 in. open for NG gas.
You need to adjust the openings before you
put the burners back in the burner box.
(Fig. 38)
b. Sear burner conversion
Remove screws at the back of burner to
detach burner from bracket and loosen the
ignition pin. (Fig.39) Then lift the back of
the sear burner while sliding burner out of
firebox.
c. Side burner conversion
Loosen the 2 screws shown in Fig. 40 to
expose the side burner orifice for changing.
Adjust the side burner air shutter to have a
1/4 in. opening.
38
R-pin
39
ignition
pin
40
side burner
Lowes.com/masterforge
16
bracket
main burner
screws
sear
burner
screws