Miele HS18 Instrucciones De Uso página 77

Problem
The robot vacuum
cleaner does not react.
"l_ _l" appears in the
display
running from bottom to
top.
rLOC appears in the
display.
Cause and remedy
The robot vacuum cleaner is switched off.
 Switch it on (press I/0 to I).
The batteries in the remote control have been inser-
ted incorrectly.
 Take care with the polarity.
The batteries in the remote control are dead.
 Exchange the batteries.
The signal between the infrared transmitter on the va-
cuum cleaner and the remote control is broken.
 Clean the front of the robot vacuum cleaner and
the top of the remote control carefully with a soft,
dry cloth and make sure that no items disrupt the
signal.
The remote control is too close to the robot vacuum
cleaner or too far away from it.
 Increase or decrease the distance and when using
the remote control, direct it towards the robot va-
cuum cleaner.
The dust box is full.
 Empty and clean the dust box.
Vacuuming was interrupted; the robot vacuum
cleaner was moved during the pause.
 Proceed as described in "Use" – "Interrupting va-
cuuming".
en
77