Safety Of Others; Residual Risks - Black and Decker BEMW461ES Manual De Instrucciones

Vibration
The declared vibration emission values
stated in the technical data and the
declaration of conformity have been
measured in accordance with a standard
test method provided by EN50636 and
may be used for comparing one tool with
another. The declared vibration emission
value may also be used in a preliminary
assessment of exposure.
Warning! The vibration emission value
during actual use of the power tool can
differ from the declared value depending
on the ways in which the tool is used.
The vibration level may increase above
the level stated.
When assessing vibration exposure to
determine safety measures required by
2002/44/EC to protect persons regularly
using power tools in employment, an
estimation of vibration exposure should
consider, the actual conditions of use and
the way the tool is used, including taking
account of all parts of the operating
cycle such as the times when the tool is
switched off and when it is running idle in
addition to the trigger time.
Do not operate the tool if the vibration
registers as abnormal.

Safety of others

This appliance is not intended for use
u
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge.
(Original instructions)
Unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety.
Children must be supervised to
u
ensure that they do not play with the
appliance.
After striking a foreign object. Inspect
u
the appliance for damage and make
repairs as necessary.

Residual risks

Additional residual risks may arise when
using the tool which may not be included
in the enclosed safety warnings. These
risks can arise from misuse, prolonged
use etc. Even with the application of
the relevant safety regulations and the
implementation of safety devices, certain
residual risks can not be avoided. These
include:
Injuries caused by touching any
u
moving parts.
Injuries caused by touching any hot
u
parts.
Injuries caused when changing any
u
parts or accessories.
Injuries caused by prolonged use
u
of the appliance. When using any
appliance for prolonged periods
ensure you take regular breaks.
Impairment of hearing.
u
Health hazards caused by breathing
u
dust developed when using your
tool (example:- working with wood,
especially oak, beech and MDF.)
ENGLISH
11