Application Tips - RDM RUST-OLEUM Cabinet Transformations Manual Del Usuario

CABINETRY PREPARATION & REPAIR -
Q. WHAT CAN I USE TO PROP UP MY CABINET DOORS DURING THE
APPLICATION PROCESS?
A. To make the process easier, drive two drywall screws into a 2 x 4. Set two of these on
your worktable to support each door and make the sides of your doors easier to
coat. See the Instructional DVD included in the kit for further details.
Q. CAN CABINET TRANSFORMATIONS
NEW BARE WOOD CABINETS?
A. No, Cabinet Transformations
previously stained wood finishes.

APPLICATION TIPS

Q. SHOULD I FINISH THE INSIDE OF MY CABINET FRAMES OR DRAWERS?
A. It is recommended that all cabinet frames, doors and drawers be coated with two
even coats of the Protective Top Coat. There is not, however, enough Protective
Top Coat to cover the inside of the cabinet frames or drawers. To ensure a clean,
even look, tape the insides edges of each cabinet frame with smooth painter's tape.
Be sure all edges are pressed down to ensure that none of the coating will be able
to bleed through.
Q. HOW DO I REFINISH AROUND STOVES, DISHWASHERS AND OTHER
APPLIANCES?
A. Mask stoves, dishwashers and other appliances with smooth painter's tape.
Be diligent about pressing in the edge to ensure none of the coating will bleed
through. Place drop cloths over countertop surfaces and floors.
WOOD REFINISHING SYSTEM BE USED ON
®
Wood Refinishing System has been designed for use on
®
continued
14