RDM RUST-OLEUM Cabinet Transformations Manual Del Usuario página 5

PREPARE FOR THE PROJECT
For best results take cabinet doors off hinges and drawers out of frames. Remove all
cabinet hardware, including hinges, drawer pulls, and knobs. Laying cabinet doors and
drawers on a flat, horizontal surface while coating will ensure the easiest application
and best outcome.
To continue your cabinet transformation, now is the time to consider
updating or replacing your cabinet hardware.
A. Establish a location in close proximity to your kitchen to stage and coat your
cabinet doors and drawers. Garages or basements are ideal locations for this step.
Be certain that this area is dirt and dust free, out of the sun and away from the wind.
It is recommended that your work area be well ventilated, but do not use a fan.
Create a work table using
a fold-out table or craft
paper covered board
with sawhorses. Tarp off
the floor, table and
surrounding area.
B. Sketch a layout of your
kitchen, numbering all
doors and drawers. Once
complete, label all doors
and drawers according to
the sketch shown to the
right with a piece of
smooth painter's tape.
2 3
1
Refrigerator
8
9
6
4 5
10
Dishwasher
11
7
4