RDM RUST-OLEUM Cabinet Transformations Manual Del Usuario página 16

APPLICATION TIPS -
Q. HOW CAN I AVOID POTENTIAL APPEARANCE PROBLEMS?
A. Start by thoroughly cleaning the surface with the Wood Cleaner and rinsing well with
clean water and sponge. Be sure to remove the Color Enhancer with the lint-free
cloths in the direction of the wood grain. Finally, use a new or clean premium quality
brush to apply 2 coats of Protective Top Coat.
Q. CAN I SPRAY OR ROLL ON CABINET TRANSFORMATIONS
A. It is not recommended to spray or roll on the Color Enhancer. The Color Enhancer
needs to be worked into the surface with a foam brush, and removed with a clean
lint-free cloth. The Protective Top Coat has been formulated and designed for optimal
application with a brush, but can be sprayed with the proper equipment. To spray the
Protective Top Coat, reduce with up to 10% water and use a HVLP sprayer at 35psi.
Ideal spray temperature and humidity conditions are 78ºF with 35% humidity.
Q. HOW DO HUMIDITY AND TEMPERATURE AFFECT THE COATING APPLICATION
PROCESS?
A. Higher humidity will cause the coating to dry more slowly while lower humidity
will cause the coating to dry more quickly. Apply when air (ambient) temperature is
50-90ºF (10-32ºC) and relative humidity is below 60%.
Q. HOW DO I DISPOSE OF UNUSED PRODUCT AND SOILED RAGS OR BRUSHES?
A. Cover any unused products tightly for storage. All tools can be cleaned with water.
Discard unwanted product according to local regulations.
15
continued
®
?