Silca Air4 Traducción De Las Instrucciones Originales página 4

Air4 Universal Receiver
The Air4 Universal Receiver can be installed into old and new automa ons.
Air4 Universal Receiver comes with an Air4 remote control (frequency 433-868 MHz). The code for the
Air4 Universal Receiver is already memorised on bu on '1', and bu ons 2, 3 and 4 are blank, ready for
memorising remote controls linked to other automa ons (gates, garages, barriers, etc.)
Where to install Air4 Universal Receivers and why
• On automa ons where the exis ng receiver is full (no further remote controls can be memorised).
• On automa ons where the exis ng receiver no longer works.
• On automa ons where the user wishes to transform an old system with a quartz type remote control
into a rolling code type.
• In automa ons where the original remotes are lost or no longer work.
Installing the Air4 Universal Receiver -
1. Find the gate control unit and open it.
- On sliding gates or barriers the
motor (Fig.2)
- On swing gates or overhead doors the
toma on system (Fig.3).
INSTALLATION
Switch off the electricity supply
control unit is usually housed in the box containing the electric
FIG.2
control unit
FIG.3
Copyright Silca S.p.A 2019. All right reserved
is usually housed in the box close to the au-
E n g l i s h
4