Audible Continuity Test - Steren MUL-055 Manual De Instrucciones

Protection against overcharge: 600VDC or AC peak in all ranges.
Response: Average response, calibrated in rms sine wave
Frequency: 45 to 400Hz
DC CURRENT
Range
200uA
2mA
20mA
200mA
10A
Protection against overcharge: 200mA 250V fuse (in the range
of 10A without breaking)
RESISTANCE
Range
20ohms
2000ohms
20kOhms
200kOhms
2000kOhms
Maximum voltage in an open circuit: <2,8V
Protection against overcharge: maximum 10 seconds at 250V
rms, in all ranges.

AUDIBLE CONTINUITY TEST

Range
)))
Protection against overcharge: maximum 15 seconds at 220V
rms, then the alarm sounds.
INSTRUCTIONS
WARNING
1.- Do not introduce DC voltages above 500 V, in order to avoid
electrical shocks.
2.- Before to use the meter, check the integrity of testing points.
Resolution
100nA
1uA
10uA
100uA
10mA
Resolution
100mOhms
1Ohm
10Ohms
100Ohms
1kOhms
Buzzer will sound if resistance is less than 70 ±20ohms
ENGLISH-3
Accuracy
± 1% of rgd ± 2d
± 1% of rgd ± 2d
± 1% of rgd ± 2d
± 1.2% of rgd ± 2d
± 2% of rgd ± 2d
Accuracy
± 0,8% of rgd ± 2d
± 0,8% of rgd ± 2d
± 0,8% of rgd ± 2d
± 0,8% of rgd ± 2d
± 1% of rgd ± 2d
Descritpion