Remove A Section - Steren REC-845 Manual De Instrucciones

3. Press to confirm the edit. The LCD will display "SPt OK". The recording has now been split into two.
• The first section is saved as the original recording number. The second section is saved as the last
recording number.
• You may press MODE to cancel at any time.

10.2 Remove a Section

Select a recording to edit and then press and hold " - " to enter Edit mode. The LCD will display "EDT".
1. Press to advance to the time point of the section you want to remove. Press and hold or to skip
backwards or forwards in 30 second increments.
2. Press PAUSE/ERASE when the desired starting time point has been reached. The LCD will display "AST".
This marks the start point of the section to be removed (A-Start).
3. Press PAUSE/ERASE when the desired end time point has been reached. The recording will pause,
and the LCD will display "BED". This marks the end point of the section to be removed
(B-End).
4. Press to confirm the edit. The LCD will display "bEd OK". The section (A-B) has
A
now been removed from the recording.
• You may press MODE to cancel at any time.
15