Cequent Performance Products 41952 Instrucciones De Instalación página 4

Warning ; Do not drill into fuel or electrical lines, take appropriate precaution.
1. Remove rivet - Remove rearmost rivet on bottom of frame rail, each side.
(Drill out rivet for easier removal). Hole in frame rail may need to be enlarged,
see step 5
3. Clamp – Securely clamp hitch to end of frame rail.
©2016 Cequent™ Performance Products, Inc. -
Printed in Mexico
2. Raise hitch to be used as template - Raise hitch into position, lining up rear
hole on hitch with hole from rivet removed in step 1.
Line up
rear hole
Rear
4. Mark holes - Using hitch as a template, mark the center of each
attachment hole.
Sheet 4 of 15 41952NP 2-17-16 Rev. A