Publicidad
Idiomas disponibles
Idiomas disponibles
5. Lower hitch - Remove the hitch and drill 11/16" holes (3) in each frame.
Hint; a small pilot hole is recommended. Remove burrs.
drill into fuel or electrical lines, take appropriate precaution.
7. Tighten all M16 CL10.9 fasteners with torque wrench to 210Lb.-Ft.
(285 N*M)
Proper torque is needed to keep the hitch secure to the vehicle when towing.
©2016 Cequent™ Performance Products, Inc. -
Warning
; Do not
Printed in Mexico
6. Install hitch - Raise hitch into position and install provided fasteners as
shown. See Figure 1.
Sheet 5 of 15
41952NP
2-17-16
Rev. A
Publicidad
