Gas Supply Connections - ESAB ESP-150 Manual De Instrucciones

SecTION 3
3.5

gaS SuPPlY cONNecTIONS

1 . Connect the gas supplies . The cylinders may be placed and secured on the cylinder rack of the truck . Before connecting
the regulators, be sure to read, understand, and follow all instructions packed with each regulator .
2 . Connect the gas hoses to the regulators and to the proper fittings (Adaptors: 74S76, Air; 19X54, Ar/H
of the ESP-150 . Connections should be wrench tight including those that are plugged . (Fig . 14)
(3) air filter Regulators
P/N-36932
fig. 13 - air filter Regulator connections
fig. 14 - gas connections
24
Select ONlY ONe (1)
Inlet connection,
NeVeR bOTh, when
selecting Plasma
gas
INSTallaTION
) on the rear panel
2