TOYAMA TE700 Manual Del Propietário página 20

Motocultivador gasolina
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Air filtre:
A dirty air filter blocks the airflow to the carburetor. To prevent carburetor
malfunction, clean the filter regularly. On dry, dusty grounds, redouble
cleaning.
 Never operate equipment without an air filter, serious malfunctions may
occur in the engine.
 Open the air filter cover and remove the air filter element.
 Clean the air filter thoroughly with hot water and detergent.
 Replace the filter cover and secure it with the.
2. Oil Filter
1. Remove the wing nut, and remove the cap and air filter cap.
2. Remove the air filter from the lid, rinse the lid and filter in soapy water,
rinse, and allow to dry completely. Or clean with non-flammable solvent
and allow to dry.
3. Dip the filter into clean engine oil, and squeeze to remove any excess
oil. The engine will release smoke if too much oil is left in the foam.
4. Remove used oil from the tank, remove any dirt with non-flammable
solvent and dry the tank.
5. Fill the reservoir to the OIL LEVEL mark with the same oil as is
recommended for the engine.
6. Reassemble the air filter, and tighten the butterfly nut securely.
3. Air Filter with double element
1. Remove the butterfly nut from the air filter cover and remove the
cover.
2. Remove the butterfly nut from the air filter, and remove the filter
3. Remove the paper filter foam.
4. Check the filter elements, and replace them if they are damaged.
Always replace the paper element in the time indicated by this manual.
5. Clean filter elements that can be reused.
4. Maintenance of spark plug
Don't use the spark plug without correct caloricity scale. The machine version is
F7TC. To keep engine in good working condition, spark plug must be clean and
without carbon deposit.
Use the specific sleeve spanner to assemble and disassemble
spark plug.
Check spark plug, if it is distinctly worn out or dehisced, please
change a new one. If it is still well, clean it.
Check spark plug clearance, the right clearance should be 0.7-
20

Publicidad

Tabla de contenido
loading

Tabla de contenido