Maintenance Instructions; Lubrication; Machine Storage; Service And Repair - RIDGID 916 Roll Groover Manual Del Operador

916 Roll Groover

Maintenance Instructions

Make sure machine is unplugged from
WARNING
power source before performing maintenance or making
any adjustments.

Lubrication

Drive Shaft and Groove Roll Shaft Bearings.
Lubricate with multi-purpose grease through fittings locat-
ed on groove roll shaft and lower roll housing after every
roll change.

Machine Storage

WARNING Motor-driven equipment must be kept
indoors or well covered in rainy weather. Store groover
in a locked area that is out of reach of children and
people unfamiliar with roll groover equipment. This
machine can cause serious injury in the hands of
untrained users.

Service and Repair

Service and repair work on this Roll Groover must be
performed only by qualified repair personnel. Machine
should be taken to a RIDGID Independent Authorized
Service Center or returned to the factory. All repairs
made by Ridge service facilities are warranted against
defects in material and workmanship.
WARNING
tical replacement parts should be used. Failure to follow
these instructions may create a risk of serious injury.
If you have any questions regarding the service or repair
of this machine, call or write to:
Ridge Tool Company
Technical Service Department
400 Clark Street
Elyria, Ohio 44035-6001
Tel: (800) 519-3456
E-mail: rtctechservices@emerson.com
For name and address of your nearest Independent
Authorized Service Center, contact the Ridge Tool
Company at (800) 519-3456 or http://www.RIDGID.com
Ridge Tool Company
When servicing this machine, only iden-
13