CLiC-iT C-ZAM Instrucciones De Uso página 42

C-8 swivel
Reference : DAS070
Life expectancy
The life expectancy of the CLiC-iT swivel depends on
how and how often it is used. Including both the
storage time and the time in use, the life expectancy is
estimated at an average of 10 years. It should be noted
that climbing or caving in a saline environment
considerably reduces the life expectancy of the swivel.
Avoid knocking or rubbing against sharp parts or
causing fraying (eg. rocks).
Only an annual inspection by a trained and competent
person can determine whether or not the product is in
good condition or should be taken out of use. This last
point is even more true in the event of extensive use
(daily use, excessive use). In any case, dispose of the
swivel after 10 years of use.
Sale
For the user's safety, it is vital, if the product is resold
outside the first destination country, that the distributor
provides the product use, maintenance, scheduled
check and repair instructions in the language of the
country of use.
Markings
Brand name : CLIC-IT
Model : 24kN Swivel
: Pictogram indicating that users must read these
instructions
EC: compliance with Regulation (UE) 2016/425 on
personal protective equipment
0082 : number of the intervening certifying body for the
monitoring of production (module C2)
24kN : resistance guaranteed on production
Manufacturing number: the last 4 digits represent the
serial number and the first 4 digits the month and the
year of manufacture
52 mm : useful maximum length between 2 swivel
rings
Certifying body intervening for the test : UE of the type
and module C2 :
APAVE SUDEUROPE
13322 MARSEILLE CEDEX 16 – France
The EU declaration of conformity is available on our website :
www.clic-it.eu
Description
Swivel made of stainless steel integrating a mechanical
rotation without ball bearings.
CS60193
CLIC-IT SWIVEL 24kN
Materials : stainless steel
Mass : 90 g
IDENTIFICATION AND VERIFICATION SHEET
IDENTIFICATION
Model :
Type :
Serial number :
Year of manufacture :
Date of purchase :
Date of first use :
Frequency of use :
INSPECTIONS AND REPAIRS
INSPECTION 1
Date :
Defects/repairs :
Inspector's signature :
INSPECTION 2
Date :
Defects/repairs :
Inspector's signature :
INSPECTION 3
Date :
Defects/repairs :
Inspector's signature :
INSPECTION 4
Date :
Defects/repairs :
Inspector's signature :
INSPECTION 5
Date :
Defects/repairs :
Inspector's signature :
24 kN
Breaking
load