CLiC-iT C-ZAM Instrucciones De Uso página 53

Checks before use
With each use, the state of the product must be
rigorously and visually inspected by a trained and
competent person
Use
The CLiC-iT C-CONNECT V2 is a connecting element to
be used with individual protection equipment for high
wire climbing.
It is not necessary for this product to be personally
aimed at a single user in the event of a collective
donation.
Carefully read and understand these instructions.
This product should only be used by trained or
competent people or, where appropriate, under the
direct supervision of a trained and competent person. It
is your responsibility to learn about the appropriate
techniques and safety measures.
In any case, this equipment must not be used beyond
its limits or in any other situation for which it is not
designed.
If other components are used with this product, their
compatibility must also be checked.
Equipping yourself with a personal protective system
against falls (PPE) does not justify freely exposing
yourself to fatal risks.
The manufacturer declines all responsibility in the event
of misuse or incorrect application of the product or for
products modified or repaired by third parties not
authorised by the manufacturer. These repairs must be
carried out according to the operating method provided
by the manufacturer.
Verify that the use of this equipment is compatible with
other systems conforming to the European standards.
Verify that the system is correctly assembled and that
the various elements work without interfering. When
using several articles be careful to make sure that the
safety function of one of the articles is not affected by
the safety function of another article or doesn't interfere
with it.
Additional important
recommendation to follow
It is vital that you are positioned under the anchor point
of the anti-fall system in such a way as to minimise the
possibility of a fall or to minimise the height of the fall.
Leaving enough free space under the user is a basic
condition for a safe stop of a fall; the height of the fall,
the extension of the rope or the movement of the user's
swing has to be taken into account in order to avoid all
possible obstacles.
A safe and efficient rescue method should be
established should someone find themselves in trouble
while using this product. Ensure the user's health and
medical condition, which would influence safety during
normal usage and in case of an emergency when using
the product.
Storage and transport
Remove the product from its packaging and store it in a
dry, clean and ventilated spot. The product should not
come into contact with corrosive chemical substances,
solvents and heat sources. There are no other special
precautions to be taken during transport.
Maintenance
Always ensure the product is in good condition before
and during use. Replace the product in case of doubts
about its condition, if it shows signs of wear or corrosion.
Avoid contact with heat sources, corrosive substances. In
case of contact wash immediately with clean water
(between 15 and 20°C) then dry with a cloth. Verify the
totality of the product and its proper rotation. If any
doubts persist, please contact SARL DEHONDT. All
maintenance and inspection of the product must be
reported on the following inspection sheet. No lubrication
is necessary under normal conditions of use.
Verify the legibility of the product's markings at each
periodic inspection
General operating instructions
Before each use, verify, inspect and ensure the
compliance of the product. In case of doubt, replace it.
This product was examined for use in standard weather
conditions (-30°C/+50°C). Replace the product if it was
subject to a significant fall, even if it doesn't show any
faulty visual or functional aspects. Check the wear of
sling or rope loop.
If wear reaches one of the indicators, discard the product.
Use as PPE
The C-CONNECT V2 may be
placed between the connecting
element of an automatic return
anti-fall device (quick open link or
detechable connector), and the
CLiC-iT connectors.
Automatic return
anti-fall device
Quick open link,
to be put in
place by the
user
Fixing CLiC-iT connectors to C-CONNECT V2
Fixing C-CONNECT V2
to sling or rope
(outside PPE directive)
Do not connect the
C-CONNECT V2
directly to a zip wire