Instructions For Assembly; List Of Spare Parts - Kettler CROSSBIKE Instrucciones De Montaje

Assembly Instructions
GB
Handling the equipment
I Before using the equipment for exercise, check carefully to en-
sure that it has been correctly assembled.
I Before beginning your first training session, familiarize yours-
elf thoroughly with all the functions and settings of the unit.
I It is not recommended to use or store the apparatus in a damp
room as this may cause it to rust. Please ensure that no part of
the machine comes in contact with liquids (drinks, perspiration
etc.). This may cause corrosion.
I The machine is designed for use by adults and children should
not be allowed to play with it. Children at play behave unpre-
dictably and dangerous situations may occur for which the ma-
nufacturer cannot be held liable. If, in spite of this, children are
allowed to use the equipment, ensure that they are instructed in
its proper use and supervised accordingly.
I The product complies fully with the appropriate safety regulati-
ons and has been passed for use by TÜV (TÜV Rheinland Pro-
duct Safty). It is unsuitable for therapeutic use.
I Do not use corrosive or abrasive materials to clean the equip-
ment. Ensure that such materials are not allowed to pollute the
environment.
I The Crossbike has a magnetic brake system.

Instructions for Assembly

I Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cau-
se for complaint, please contact your KETTLER dealer.
I Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
I The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if
possible technically talented.
I Please note that there is always a danger of injury when wor-
king with tools or doing manual work. Therefore please be ca-
reful when assembling this machine.
I Ensure that your working area is free of possible sources of
danger, for example don't leave any tools lying around. Al-
ways dispose packaging material in such a way that it may not
cause any danger. There is always a risk of suffocation if child-

List of spare parts 24-25-26

When ordering spare parts, always state the full article number, spa-
re partnumber, the quantity required and the S/N of the product.
Example order: Art. no. 07956-500 / spare-part no.
10100018/ 2 pieces / S/N no.................... Please keep origi-
nal packaging of this article, so that it may be used for transport
at a later date, if necessary.
Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this
should be clearly stated on the order by adding the words „with
fastening material".
4
I To operate correctly, the pulse function requires a minimum vol-
tage of 2,7 volts (only for computers working with batteries).
I The equipment is dependent of revolutions per minute.
I Please ensure that liquids or perspiration never enter the ma-
chine or the electronics.
I Before use, always check all screws and plug-in connections as
well as respective safety devices fit correctly.
I Always wear suitable shoes when using.
I All electric appliances emit electromagnetic radiation when in
operation. Please do not leave especially radiation-intensive
appliances (e.g. mobile telephones) directly next to the cockpit
or the electronic controlsystem as otherwise values displayed
might be distorted (e.g. pulse measurement).
I Only set the adjusting unit when the equipment is standing still.
Otherwise there is a danger of becoming jammed by the mo-
ving handlebars.
I Only use the footrests to support your feet when using the hand-
lebar movement.
I Always carefully follow the instructions on getting on and off
the equipment (see handling/training instructions).
I The product is not suitable for use by persons weighing over
130 kg.
ren play with plastic bags!
I The fastening material required for each assembly step is sho-
wn in the diagram inset. Use the fastening material exactly as
instructed. The required tools are supplied with the equipment.
I Bolt all the parts together loosely at first, and check that they
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt, then use spanner to finally tighten nuts
completely against resistance (locking device). Then check that
all screw connections have been tightened firmly. Attention:
once locknuts have been unscrewed they no longer function
correctly (the locking device is destroyed), and must be repla-
ced.
I For technical reasons, we reserve the right to carry out preli-
minary assembly work (e.g. addition of tubing plugs).
I Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary.
GB KETTLER (GB) Ltd.
Merse Road · North Moons Moat · Redditch, Worcesters-
hire B98 9HL · Great Britain
KETTLER International Inc.
USA
P. B. 2747 · Virginia Beach · VA 23450 -2747USA
http://www.kettler.net