Kohler STERLING 4700 Serie Guía De Instalación Y Cuidado página 10

5. Install the Wall Jambs
Attach the Wall Jamb to the In-line Connector Jamb
Position the wall jamb over the bottom track and against the in-line connector jamb.
Insert a #8-18 x 3/4" screw through a bumper and the wall jamb and attach it to the connector jamb.
Repeat with the remaining screws and bumpers.
Insert the bumper inserts into the bumpers.
Repeat these steps for the in-line connector jamb on the other side of the doors.
Secure the In-line Panels
Adjust the in-line panel and drill three 1/8" (3 mm) diameter holes through each in-line wall jamb
and side frame.
Secure each end of the in-line panel to the wall jamb with #8-18 x 3/8" screws.
1054391-2-D
#8-18 x 3/4"
Panhead Screw
#8-18 x 3/8"
Panhead Screw
Adjustable In-line
Connector
Bumper
Bumper
Insert
Wall Jamb
#8-18 x 3/4"
Panhead Screw
#8-18 x 3/8"
Panhead Screw
In-line
Panel
1/8"
(3 mm) D.
Hole
In-line
Connector
Jamb
10 Sterling