Kohler STERLING 4700 Serie Guía De Instalación Y Cuidado página 7

Important:
2. Measure and Cut the Bottom Track
CAUTION: Risk of personal injury. Always wear safety glasses when cutting materials.
Measure from one in-line connector jamb to the other at the flattest part of the shower ledge
(dimension "D").
Mark dimension "D" on the bottom track.
IMPORTANT! For best results, use a 32 teeth per inch hacksaw blade and a miter box to cut the bottom
track.
Subtract 7/8" (2.2 cm) from dimension "D" and cut the bottom track to this dimension.
File the rough edges smooth where the bottom track was cut, taking care not to mar the finished
surface.
NOTE: If there are curves where the sidewalls meet the threshold, use a file to contour the bottom track
edges to match the curves.
Sterling
Top View
Front View
Measure carefully. Failure to do so can result in an
improperly cut bottom track and can void the
warranty.
7
D
1054391-2-D