Movement RTE Manual De Instrucciones página 16

ASSEMBLING THE EQUIPMENT
CAREFUL!
Before starting to assemble the elliptical it is necessary to pay attention to the
following:
•Check that the packaging is not damaged and the parts and components of
the equipments are not broken in any way.
•It is recommended that the elliptical be taken out from its packaging in the
area where it is to be assembled.
•The assembly area should be clean.
•The floor ought to be flat and leveled to avoid destabilizing the elliptical.
•The space around the elliptical should be kept free from anything as
described in this Manual (see Operational Instruction Chapter).
•It is advised that the elliptical be assembled far from any place that is damp
and away from sun light in order to avoid damage to the equipment's
electrical components.
In order to assemble the equipment the following tools are needed:
Allen n°6
Medium torque
Allen n°8
Thread Lock Wrench 13
50%
Do not
completely tighten
the screws
Diameter [mm]
16
ICONS
100%
Do the final
tightening of
the bolts