Spo Probe Connection - CMi PC-66L Manual De Uso

 If the device does not power properly or the battery is
damaged, please contact CMI customer service.

In order to prolong the lithium battery's using life, please
pay attention to the battery maintenance.
3 SpO Probe Connection
2
Connect the SpO
right side of the Oximeter. After starting up the Oximeter, insert
one finger (index finger, middle finger or ring finger with
proper nail length) into the probe according to the
demonstration shown in the following figure.
Figure 3-1 Illustration of using SpO
Instructions of Operation
1. The finger should be put in properly and correctly.
2. Do not shake the finger and keep at ease during
measurement.
3. Do not put wet finger directly into sensor.
User Manual for Pulse Oximeter
probe to the connector labeled "SpO
2
probe (adult finger clip)
2
6
" at the
2