Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
For the individual patients, there should be a more
prudent inspecting in the placing process. The sensor can
not be placed on the edema and tender tissue.
The local law should be followed when disposing of the
expired device or its accessories.
Attentions
Keep the Oximeter away from dust, vibration, corrosive
substances, explosive materials, high temperature and
moisture.
If the Oximeter gets wet, please stop operating it and do
not resume operation until it is dry and checked for
correct operation. When it is carried from a cold
environment to a warm and humid environment, please
do not use it immediately. Allow at least 15 minutes for
the Oximeter to reach ambient temperature.
DO NOT operate the button on the front panel with sharp
materials or sharp point.
DO NOT use high temperature or high pressure steam
disinfection on the oximeter and probes. Refer to related
chapter
disinfection.
The intended use of this device is not for therapy purpose.
Declaration of Conformity
The manufacturer hereby declares that this device complies
with the following standards:
IEC 60601-1, ISO 9919:2009, ISO 80601-2-61:2011
User Manual for Pulse Oximeter
for
instructions
regarding
III
cleaning
and
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
