Operation; Power On/Off The Oximeter; Default Display Screen - CMi PC-66L Manual De Uso

4 Operation

4.1 Power on/off the Oximeter

Press and hold "

power the device ON or OFF.
During measurement, if the "Probe off" status is

showing for longer than one minute, and if there is no
keypad operation for one minute, then the device will
power off automatically.

4.2 Default Display Screen

Press and hold"
Oximeter. The display
appropriate sensor according to the patient type and
change the related settings". Then the display will show the
default screen, as shown in Figure 4-1.
Battery indicator
SpO2 mark
SpO2 value
Pulse
Plethysmogram
Current time
The current SpO2 lower alarm threshold
User Manual for Pulse Oximeter
" power/back key for 2 seconds to
" power key for 2 seconds to power on the
screen
Pulse rate mark
Figure 4-1 Default Display Screen
will
show:
Memory full icon
8
"Please
Pulse rate
symbol
Pulse rate value
Pulse strength
bar-graph
Sound indicator
Patient type
use