K2 Pumps WPS05001K Manual Del Propietário página 4

CAUTION: In order for the pump and tank to operate properly, the pressure tank needs to be drained of all water
BEFORE INSTALLING THE NEW PUMP. After draining, if you are using the supplied 30/50 psi pressure switch at the
pre-set settings, add or adjust the air pressure in the tank to 28 psi of pressure BEFORE start up.
PREPARATION
Parts you may need for assembly not include（Fig.1）
Item Description
1 1-1/4in.Brass Foot Valve
1-1/4in.PVC MPT×S Male
2
Adapter
3 1-1/4in.PVC rigid Pipe
4 Well Seal Single Pipe
1in. PVC MPT×S Male
5
Adapter
1-1/4in.Lead Free Brass
6
Check Valve
1-1/4in.×3in. Galv. Steel
7
Nipple
1-1/4in.PVC FPT×S Female
8
Adapter
9 1in.PVC rigid Pipe
1in.PVC 90-Degress S×S
10
Elbow
1in.×3/4in.PVC Reducing
11
Male Adapter
Optional Parts For Assembly not included (Fig.2)
Item Description
1 3/4in.Slip×Slip Ball Valve
2 1-1/4in. PVC Slip×Slip Union
3 3/4in. PVC FPT×FPT Union
1-1/4in.PVC Couping
4 1in.PVC Couping
3/4in.PVC Couping
SHALLOW WELL APPLICATION
Shallow well systems are identified by one pipe going to the well, lake or river.
4
Item Description
12 3/4in. PVC MPT×S Male Adapter
13 3/4in.PVC rigid Pipe
14 3/4in.CPVC CTC Socket Tee Fitting
15 3/4in.PVC 90-Degress S×S Elbow
16 1-1/2in.Brass Foot Valve
17 1-1/2in.×3in.Galv.Steel Nipple
18 1in.×3in.Galv.Steel Nipple
19 1in.PVC FPT×S Female Adapter
20 4in.Well Seal Double Pipe
21 1-1/4in.PVC Tee FPT× FPT× FPT
22 1-1/4in.Galvanized Plug
Item Description
5 20 Gal. or larger Tank
6 Well point, Drive Couping, Drive Cap
7 1/8in.AVC control kit
1. CASED WELL APPLICATION, 4" OR LARGER CASING (Fig.1)
A hole bored into the earth with machinery. Depths range from a few feet
to 25 feet. Common well diameters are 4", 5", 6" and 8" for domestic
water wells.
1
2
For Professional Technical Support call 1-844-242-2475