Symbols - AngelSounds JPD-100S mini Manual De Instrucciones

equipment). Furthermore, all configurations shall comply
with the system standard IEC 60601-1-1. Anybody who
connects additional equipment to the signal input part or
signal output part configures a medical system, and is
therefore, responsible that the system complies with the
requirements of the system standard IEC 60601-1-1. The
Product Service Port is only intended for use during
maintenance by authorized service personnel.
CAUTION: Case Cleaning Solutions
When disinfecting the case, use a non-oxidizing disinfectant,
such as ammonium salts or a glutaraldehyde based cleaning
solution, to avoid damage to the metal connectors.
CAUTION: Environment of use
The Product is designed for indoor use.
confirm that the environment of use meets the required
operating environmental specifications before using.
CAUTION: Cold Environments
If the Product is stored in an environment with a temperature
below the operating temperature, the unit should be allowed
to warm up to the needed operating temperature before
using.
CAUTION: Product recycling or disposal
The product could be sent back to the manufacturer for
recycling or proper disposal after their useful lives.

2.2 Symbols

The following symbols may appear in this manual, on the Product, or on
its accessories. Some of the symbols represent standards and
compliances associated with the Product and its use.
Consult instructions for use of the Product
and/or its accessories.
Warning Information
5
Operator must