AngelSounds JPD-100S mini Manual De Instrucciones página 47

Do not mix disinfecting solutions (such as bleach and ammonia) as

hazardous gases may result.
Do not clean electrical contacts or connectors with bleach.

Cleaning instructions:
1. Before cleaning the Product, turn off the device and disconnect the
power cord.
2. Before cleaning, remove all adherent soil (tissue, fluids, etc.) and
wipe thoroughly with a cloth dampened with water before applying
the cleaning solution.
3. When cleaning, do not immerse. Keep the exterior surface of the
device clean and free of dust and dirt, clean exterior surface of the
unit with a dry, soft cloth .if necessary, clean it with a soft cloth
soaked in a solution of soap and wipe dry with a clean cloth
immediately. Wipe the transducer body with soft cloth to remove
any remaining coupling gel .Clean with soap only
4. Wring any excess moisture from the cloth before cleaning.
5. Avoid pouring fluids on the device, and do not allow fluids to
penetrate the exterior surfaces of the device.
6. To prevent scratching the display, the use of a soft cloth is
recommended.
CAUTION: To prevent damage to equipment, do not clean any
part of the Product or Accessories with phenolic compounds. Do
not use abrasive or flammable cleaning agents. Do not steam,
autoclave, or gas-sterilize the Product or accessories.
CAUTION: Cleaning liquids: Do not submerge the device in
liquids or pour cleaning liquids over, into or onto the device.
.
* Don't use strong solvent, for example, acetone.
* Never use an abrasive such as steel wool or metal polish.
* Do not allow any liquid to enter the product, and do not immerse any
parts of the device into and liquids.
* Avoid pouring liquids on the device while cleaning.
14