Install Battery; Section 5: Operation Procedure; Preparation - AngelSounds JPD-100S mini Manual De Instrucciones

The USB interface is used to connect recording Cable (NOTE: please
refer to accessories).
4.5 Battery
This device is internal powered. The power of JPD-100S (mini) comes
from a 9V alkaline battery (IEC type No. 6F22 or equivalent).

Section 5: Operation procedure

This section provides the description for operation.

5.1 Preparation

Follow these recommendations to preparation for operation:
5.1.1

Install Battery

Open the battery cover, and install the 9V battery. Then, Install the
battery cover.
NOTE ： You should push the battery cover backward like the figure
upward.
Then you can open the battery cover.
Battery type: Alkaline battery 9V
CAUTION:
Remove the battery if the device is not likely to be used for
some time. And keep the battery in cool and dry environment.
9