AngelSounds JPD-100S mini Manual De Instrucciones página 53

Ocultar thumbs Ver también para JPD-100S mini:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range
applies.
NOTE 2 These guidelines may not apply in all situations.
Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
a. Field strengths from fixed transmitters, such as base stations
for radio (cellular/cordless) telephones and land mobile radios,
amateur radio, AM and FM radio broadcast and TV broadcast
cannot be predicted theoretically with accuracy. To assess the
electromagnetic environment due to fixed RF transmitters, an
electromagnetic site survey should be considered. If the
measured field strength in the location in which the Fetal Doppler
is used exceeds the applicable RF compliance level above, the
separation distance calculated
from the equation applicable to the
frequency of the transmitter.
Recommended separation
distance
a. Where P is the maximum output
power rating of the transmitter in
watts (W) according to the
transmitter manufacturer and d is
the recommended separation
distance in metres (m). Field
strengths from fixed RF
transmitters, as determined by an
electromagnetic site survey,
should be less than the
compliance level in each
frequency range.
b. Interference may occur in the
vicinity of equipment marked with
the following symbol:
20

Publicidad

Capítulos

Tabla de contenido
loading

Productos relacionados para AngelSounds JPD-100S mini

Tabla de contenido