Briggs & Stratton 1696563 Manual Del Operador página 20

Problem
Unit fails to propel itself.
Unit fails to discharge snow.
20
Look for
Drive belt loose or damaged.
Incorrect adjustment of traction drive
cable.
Worn or damaged friction disc.
Auger drive belt loose or damaged.
Auger control cable not adjusted
correctly.
Broken shear pin or shear bolt.
Discharge chute clogged.
Foreign object lodged in auger.
Remedy
Replace drive belt. See authorized
dealer.
See authorized dealer.
Replace friction disc. See authorized
dealer.
See authorized dealer.
Adjust auger control cable. Refer to
Maintenance section of this manual.
Replace shear pin or bolt. Refer to
Maintenance section of this manual,
or see an authorized dealer.
Stop engine immediately. Always use
the clean-out tool to clear a clogged
discharge chute, not your hands.
Clean discharge chute and inside of
auger housing. Refer to Discharge
Chute Warning in the Operator Safety
section.
Stop engine immediately. Always use
the clean-out tool to clear a clogged
chute, not your hands. Remove object
from auger. Refer to WARNINGS in
the Operator Safety section.