Setting Up The Scale; Correct Weighing - Seca 335 Manual De Instrucciones Y Garantía

Battery
bAtt
If or
1.5 V type AA R6 round-cell batteries.
– Carefully turn over the scale so that the
base of the scale is accessible.
– Press the latches of the battery com-
partment towards the centre of the
base and take off the cover.
– Place the new batteries in the battery
compartment.
Check that polarity is correct!
– Close the cover and then turn the scale
back up the right way.

4. Setting up the scale

The scale is fully assembled on delivery.
Remove the packaging and place the scale on a firm, level surface.
5. Operation

Correct weighing

– Press the Start key with no load on the
scale.
SE(A 88888
, and
secutively in the display. The scale is
then automatically set to zero and ready
for use.
– Place the baby on the scale.
– Read the weighing result off the digital
display.
Weight is displayed in 10 g increments
up to 10 kg and in 20 g increments up
to 15 kg.
– To switch off the scale, press the Start
key again.
Model 335
appear in the display, you should change the batteries. You need 6
0. 0 00
appear con-
Connection for
mains unit
Battery
compartment
13