2. ARTROMOT®-S3 description
The motorized CPM device supports the
following movements of the shoulder joint:
Adduction/Abduction
Internal/External rotation 90°‑0°‑90°
Extension/Flexion (Elevation) 0°‑30°‑175°
with elbow bent between
Horizontal
Adduction/ Abduction
(manual adjustment only)
It can be reconfigured for use on either side.
Note!
To allow the current position of the
CPM device to be clearly indicated, the
internal rotation values on the display
and throughout this document are
identified with "‑".
Note!
Elevation denotes the upward movement
of the arm beyond 90° abduction.
Extension and flexion are set by entering
the adduction and abduction values
These are some of the outstanding
ARTROMOT®-S3 features:
– anatomically correct setup
– physiological movements
– maximum possible ranges of motion
– programming unit for precise adjust‑
ment of patient‑specific therapy values
– chip card for storage of the programmed
therapy parameters
– easy transport
Biocompatibility
Those parts of the ARTROMOT®-S3 device
0°‑30°‑175°
that come into contact with the patient
when the device is used as intended, are
designed to fulfil the biocompatibility
requirements of the applicable standards.
60° and 90°
Essential Performance Features
0°‑120°
– The programmed angles are accurately
– The programmed speeds are accurately
– The selected mode and mechanical
Frequent functions:
a) Unpacking (device and accessories)
b) Inserting the motion element and locking
c) Mounting the armrest
d) Device connections (mains power con‑
e) Mechanical adjustments of the motion
f) Programming the control pendant
g) Storage
44
maintained with a tolerance of +/‑ 2°.
maintained with a tolerance of +/‑ 5% .
settings do not change during
operation.
it at the system rack (chair)
nection, connecting the control pendant
and the motion element)
element on the rotational axes
(range of motion, speed, functions)